LTS -40℃～80℃-LNEYA Thermal Test Chillers

LTS -40℃～80℃

PRODUCT ADVANTAGES

· Temperature Control Accuracy ±0.1℃ at -40℃～-10℃

· Flow Control 12～45L/min

· Internal Circulating Fluid Volume 4L~10L

· Condenser Air-cooling /Water-cooling

· Expansion tank volume 10L~20L

Request A Quote

More Applications

Product Features

Cooling Heating Temperature Control System (Fluorinated Liquid)
The pressure holding test of the medium circulation system is 7 bar.
Use high-quality magnetic pump without mechanical shaft seal.
Optimize temperature sampling and response speed, specially designed control algorithm, can respond quickly to stable temperature control.
Enhance the design of circulating pump capacity to meet the high-lift requirements of the system.
Continuous high temperature cooling technology meets the requirements of stable operation when heat is loaded on the heat sink plate and requires constant temperature control of cooling and heating.
In view of the volatile characteristics of fluorinated liquid, the joint design and system sealing design are strengthened to ensure the service life of the medium.

Main Parameters

Model	LTS-402	LTS-403	LTS-404	LTS-406	LTS-408
	LTS-402W	LTS-403W	LTS-404W	LTS-406W	LTS-408W
Temperature range	-40℃～80℃
Temperature control accuracy	±0.1℃ -40℃～-10℃
Flow control	7～25L/min		12～45L/min
	The flow control adopts frequency converter adjustment, and the speed is automatically adjusted according to the feedback signal of the flow sensor. The maximum pressure of the circulating pump is 5bar.
Internal circulating fluid volume	4L	5L	6L	8L	10L
Expansion tank volume	10L	10L	15L	15L	20L
System pressure display	The pressure of the refrigeration system is realized by a pointer pressure gauge (high pressure, low pressure)
	The pressure acquisition outlet position of the circulatory system is detected by a pressure sensor and displayed on the touch screen
Controller	Siemens PLC, fuzzy PID control algorithm, with cascade control algorithm
Temperature control	Heat transfer medium outlet temperature control mode
	External temperature sensor: (PT100 or 4～20mA or communication setting) control mode (cascade control)
Letter of agreement	Ethernet interface TCP/IP protocol
	RS485 interface modbus RTU protocol
Internal temperature feedback of equipment	Equipment heat transfer medium outlet temperature, medium inlet temperature, refrigeration system condensation temperature, ambient temperature, compressor suction temperature, cooling water temperature (available for water-cooled equipment)
Closed circulation system	The whole system is a fully enclosed system, low temperature does not absorb moisture in the air, does not volatilize the heat transfer medium, and the low temperature automatically supplements the heat transfer medium into the circulation system
Compressor	Emerson Copeland/Danfoss Scroll Flexible Compressor
Circulating pump	German brand magnetic circulation pump
Evaporator	Adopt Danfoss/Gaoli plate heat exchanger
Condenser	Micro channel condenser (air-cooled)
	Plate heat exchanger (water-cooled), special attention: clean factory water is required
Refrigeration accessories	Danfoss/Emerson accessories (filter drier, oil separator, high and low pressure protector, expansion valve)
Operation panel	Wuxi Guanya customized 7-inch color touch screen, temperature curve display\EXCEL data export
Security	With self-diagnosis function; phase sequence open-phase protector, refrigerating machine overload protection; high-pressure pressure switch, overload relay, thermal protection device and other security functions.