GX -65℃~-10℃
PRODUCT ADVANTAGES
· Temperature Control Accuracy ±2℃
· Heating Power 2kW~8kW
· Cooling Capacity 1kW~4kW
· Volume 280L~1600L
· Unpacking Mode: Up /Side
· Power 5.5W~19kW
· Weight 380KG~780KG
Industrial Refrigerator is composed of a compressor, condenser, evaporator, filter drier, expansion throttling valve of the five most series, note the amount of refrigerant inside (refrigerant), the electrical appliances (including controller) according to the requirement of the environment and control the operation of the compressor to achieve the purpose of heat transfer and refrigeration.
Mainly used in industrial cold treatment, the uniform, fine and dispersed carbides produced on the metal structure matrix structure are precipitated. The appearance of such carbides will result in a significant increase in the wear resistance and friction properties of the metal, an increase in hardness, and will directly increase the life of the wear parts. The ideal product to replace liquid nitrogen.
1.Three layers of sealing, moulded heat break layer, embedded vacuum insulation board
2. Applicable to mechanical workshop environment
3.Industrial refrigerators within – 100 ℃ and 100 m3 can be customized
4.Large plot ratio, large bearing capacity
Model | GX-6528N | GX-6550N | GX-6580N | GY-6528N | GY-6550N | GY-6580N | GY-65A16N |
volume | 280L | 500L | 800L | 280L | 500L | 800L | 1600L |
Inner dimension | 610*600* 760mm | 800*735* 850mm | 1000*800* 1000mm | 800*600* 600mm | 1200*650* 650mm | 1350*800* 750mm | 2000*900* 900mm |
Type | (Vertical) | (Chest/Horizontal) | |||||
Capacibility carrying | 150KG | 220KG | 300KG | 150KG | 220KG | 300KG | 650KG |
Designed bearing capacity is two times of the standard one, (refrigeration system is designed according to the standard capacity when target artifact weight is greater than the standard capacity, the cooling rate will decrease) | |||||||
Temp. range | -65℃~-10℃ optional -65℃~60℃ | ||||||
Cooling capacity at -60℃ | 1kW | 1.5kW | 2.5kW | 1kW | 1.5kW | 2.5kW | 4kW |
Temp. accuracy | ±2℃ | ±2℃ | ±2℃ | ±2℃ | ±2℃ | ±2℃ | ±2℃ |
Heating power | 2kW | 3kW | 5kW | 2kW | 3kW | 5kW | 8kW |
Nickel-chromium alloy electric heating heater, the controller has double safety protection, with independent temperature limiter protection. | |||||||
Inside circulating air | 1650 m³/h | 2100 m³/h | 2750 m³/h | 2100 m³/h | 2750 m³/h | 3500 m³/h | 6000 m³/h |
Dimension | 1150*1150* 1850 | 1350*1300* 1850 | 1550*1300* 2100 | 2200*1150* 1150 | 2700*1200* 1200 | 2900*1300* 1250 | 3700*1400* 1350 |
Power 380V 50HZ | 5.5kW MAX | 7.5kW MAX | 13.5kW MAX | 5.5kW MAX | 7.5kW MAX | 13.5kW MAX | 19kW MAX |
Weight | 380kg | 480kg | 650kg | 385kg | 485kg | 650kg | 780kg |
Compressor | Tecumseh | Dorin | |||||
Intermediate heat exchanger | KAORI Plate heat exchanger | ||||||
Dry filter | Emerson | ||||||
Expansion valve | Electronic expansion valve | ||||||
Evaporator | Copper-tube with aluminum-fin | ||||||
Cooling Type | Air-cooled with water-cooled auxiliary functions (Ensure good cooling capacity when temp. above 30 degrees) | ||||||
Means of insulation | Polyurethane foam insulation, thermal insulation layer 125 mm, with embedded FIR boards | ||||||
Safety Protection | Self-diagnosis function; Phase sequence phase failure protection; leakage protector; cooling unit overload protection; high and low pressure switch, overload relay, thermal protection device, high temperature protection and temperature fault protection. | ||||||
Case material | Outside is cold rolled steel painting, internal is SUS304 wire drawing board. | ||||||
Refrigerant | R404A R23 | ||||||
Optional | High temperature reaches 150degree and temperature accuracy is ±0.5degree;the input power will be changed(When select this model, the thickness of thermal insulation layer will be 150mm,thermal insulation material will be silicate and vacuum plate) | ||||||
Optional | Closed circulating oil heating system, no direct electric heating element inside the box, suitable for flammable products test | ||||||
Optional | Temp. accuracy ±0.5℃ | ||||||
Optional | Cooling and heating program controlled, meet cold treatment process requirements(can set 5 programs, each program can edit 45 steps.) | ||||||
Optional | Interior door, reduce cooling capacity lost when picking small workpieces (temperature below 60 degrees optional) | ||||||
Optional | Outside SUS304 wire drawing board case | ||||||
Optional | Diameter 50mm cable hole | ||||||
Optional | Electric heating vacuum glass observation window (with lighting) 200mm*300mm | ||||||
Optional | Low temperature automatic defrost (can be once per hour or use manual button to defrost), ensure it can work at low temperature for long time even the door is open and close frequently) |
Product Applications
Recommended ProductsUsed for Reaction
loading…
已经是到最后一篇内容了!